Eco Wall
TRANSFORM YOUR ENTIRE SPACE WITH ECO WALL.
Transform Your Space with Eco Wall
Eco Wall is a truly green building product designed to combine sustainability, durability, and style. Made from over 50% recycled materials, Eco Wall is free of PVC, BPA, and halogens, offering a fire-rated architectural solution that is safe and eco-friendly. Its smooth, fungi-resistant surface ensures easy cleaning and long-lasting protection, ideal for high-traffic commercial or residential spaces.
The image is printed on the reverse side of a transparent co-polyester sheet, protecting graphics from abrasion and damage by placing the printed side against the wall. This design makes Eco Wall perfect for walls prone to frequent impact or wear, providing a striking and resilient finish.
Key Benefits
Environmentally friendly, made from 50%+ recycled content
Fire-rated for enhanced safety
Chemical, stain, and shatter resistant
Fungi resistant for better hygiene
Easy to clean with mild soap and water
Made in the USA
Installation Overview
Before You Begin
Inspect panels thoroughly and do not install damaged materials.
Prepare wall surfaces by ensuring they are clean, smooth, and free of loose coverings or dust.
Priming may be required depending on the surface type and environmental conditions.
Conduct adhesion tests on painted, drywall, plywood, or existing wallcoverings to ensure proper bonding.
Surface Preparation
New drywall or plaster: smooth, tape, and dust-free surfaces are required; allow plaster to cure for 30+ days.
Painted surfaces: test adhesion in a discreet area; remove or seal unstable paint.
Particle board, plywood, MDF: clean thoroughly and sand smooth if needed.
Existing wallcoverings: remove loose sections, clean, and dry thoroughly.
Concrete & masonry: ensure cleanliness, dryness, and structural soundness; fill holes and cracks.
Tools Needed
8” laminate roller
9” x 3/8” nap roller
Pencil
Utility knife
Tape measure
Installation Steps
Dry-fit panels to plan placement and marking plumb lines for alignment.
Make all necessary cuts and drillings before applying adhesive; allow a 1/8” clearance around fixtures and frames.
Apply adhesive to wall in panel-width sections using a roller, ensuring full coverage but avoiding over-curing.
Align and gently press the panel starting from the plumb line edge, smoothing with a laminate roller to remove air pockets.
Repeat for each panel, cleaning any excess adhesive immediately with mild soap and water before it cures.
Maintain HVAC conditions between 60–75°F and 30–55% humidity for 14 days before, during, and after installation to ensure optimal adhesion.
Eco Wall offers an innovative, sustainable way to enhance spaces with style and protection, backed by reliable installation guidelines to ensure lasting performance.